PC-Link Readers
Technical Specifications
Host Interface
| |
USB |
Serial
|
PCMCIA |
| PC Twin |
X |
X |
|
| PC USB-SL |
X |
|
|
| PC Pinpad |
X |
|
|
| PC Card |
|
|
X |
| PC Express |
|
|
X |
| USB Shell Token v2 |
X |
|
|
Smart Card Interface
PC Core hardware and firmware architecture:
- Supports ISO 7816 Class A, B and C cards (5 V, 3 V, 1.8 V)
- Supports all ISO 7816 TA1 parameters (up to 500 Kbps, TA1=97 with a 4Mhz
reader clock)
- Reads from and writes to all ISO 7816-1,2,3,4 microprocessor cards, T=0
and T=1 protocols
- Supports memory cards using "Synchronous Card API"
- Short circuit detection
Smart Card Connector
- 8 friction contacts - ISO location
- 100,000 insertion cycles
- EMV Level 1 mechanically compliant
- Embossed smart cards supported
Human interface
- LED one color (Green), dual state (blinking: waiting card insertion; ON:
card reading / writing)
- PC Pinpad:
> 2x16 alphanumeric display
> orange LED ON at Secure PIN Entry mode
> Tactile keypads with 16 (4x4) silicon rubber
keys
Cable/Power Supply
- USB reader
> Cable 1,5 m long
> USB 2.0 type A connector
> Power supply thru USB port
> Operating voltage [4.4 – 5.5V]
- Serial reader
> Cable 1,5 m long
> Serial DB9 connector
> Power supply thru PS/2 port
> Operating voltage 5 V +/-10%
|
- PCMCIA PC Card reader
> Maximum operating current: 25mA
> Power supply thru PC Card port
> Operating voltage 5 V +/- 10%
- PCMCIA ExpressCard reader
> Power Consumption Suspend mode: 1mA
> Typical operating: 55mA
> Maximum operating: 200mA
> Power supply thru ExpressCard port
> Rating 3.3V 1A primary supply voltage
|
> Read our offer
